Structured cabling, fiber optics, CCTV, access control and low voltage — planned, installed, tested and documented for offices, warehouses, healthcare facilities and multi-site operations across the U.S.
Cat6A structured cabling for multi-floor offices, open-plan workspaces, conference rooms and executive suites — with clean rack-room organization and expansion-ready pathways.
High-ceiling commercial cabling with appropriate pathway planning for active warehouse environments, forklift clearances and operational floor constraints.
Standards-based Cat6 horizontal cabling for general office drops, conference rooms and device connectivity — delivering reliable 1 Gbps performance for everyday commercial environments.
10-Gigabit-ready Cat6A cabling for high-performance commercial environments — recommended for wireless AP drops, PoE++ devices, healthcare facilities and any buildout where future-proofing matters.
Single-mode and multimode fiber installation connecting MDF to IDF rooms across floors, risers and inter-room environments in multi-floor commercial buildings.
High-capacity fiber infrastructure for server rooms, core rooms and technical spaces — with organized cabinet patching, clean interconnect planning and full OTDR documentation.
Outdoor and inter-building fiber runs connecting separate buildings, data closets or campus facilities — planned for conduit availability, distance and future bandwidth growth.
Every fiber run is OTDR-tested, results documented and labeled clearly — so IT teams and future contractors have a complete, accurate picture of the fiber infrastructure.
Cat6A cabling to ceiling AP locations with proper pathway routing, junction boxes and PoE switch integration for enterprise wireless deployments across commercial facilities.
Cabling for AV displays, video conferencing, projection, paging and intercom systems in conference rooms, common areas, warehouses and multi-zone commercial spaces.
Low-voltage cabling for digital signage, time clocks, nurse call systems, building automation endpoints and other specialty devices inside active commercial facilities.
Low-voltage work coordinated for occupied offices, operating warehouses and commercial environments that need phased scheduling, after-hours access or minimal disruption installation.
Cat6 or coax cabling to all camera locations — interior, exterior, ceiling-mount and wall-mount positions — routed cleanly back to the recording room or NVR equipment.
Recording room infrastructure including backhaul cabling, PoE switch integration, organized patch panels and equipment room documentation for commercial security systems.
Camera coverage planning for operational areas, customer-facing spaces, perimeter zones and loading areas — coordinating with security integrators and facilities teams.
CCTV cabling coordinated alongside access control, structured cabling and network infrastructure — reducing trade conflicts and delivering cleaner security documentation at project close.
Cabling for card readers, keypad readers, biometric devices and controller panels — run back to central access control equipment with clean routing and organized terminations.
Electric lock, magnetic lock, door strike and request-to-exit device cabling — coordinated with door hardware installers and security integrators for clean, reliable entry systems.
Access control cabling for multi-door commercial rollouts — offices, warehouses, healthcare facilities and multi-building or multi-site programs where consistent standards matter.
Access control cabling for clinics, pharmacy rooms, server rooms, storage areas and other controlled spaces requiring careful coordination in occupied or sensitive environments.
High-density copper and fiber structured cabling for data center rows and cabinet deployments — organized with proper cable management to support airflow and future maintenance.
Organized patch panel installation, cable management and documentation for data rooms and server environments — making changes, troubleshooting and future growth straightforward.
Legacy cabling cleanup, documentation and re-organization for existing server rooms and technical spaces that have grown messy over time and need a structured, supportable environment.
Every data center project closes with cable testing, consistent labeling and as-built documentation — so IT teams and future contractors have accurate records of the entire infrastructure.
Commercial network drop installation for workstations, conference rooms, printers, phones and operational devices — organized back to patch panels with proper labeling and documentation.
Commercial data cabling for offices, conference rooms, support spaces and day-to-day LAN infrastructure — including moves, adds, changes and renovation work in active facilities.
Network room, rack and patch-panel work designed for cleaner administration, easier troubleshooting and future adds or changes — not just cable termination.
Cable testing, OTDR fiber measurement, performance validation and TIA-aligned documentation so every project closes with a clean, verifiable infrastructure record.
Patch-panel labeling, pathway organization and as-built documentation that help IT and facilities teams understand, support and expand the finished system.
Phased work, after-hours access and structured coordination for offices, warehouses and operating business environments that can't go dark during installation.
Repeatable infrastructure standards across branch offices, distribution centers, retail locations and regional facilities — consistent documentation from every site.
Fiber and copper decisions shaped around future bandwidth, network growth, device expansion and longer infrastructure lifecycles — so the environment doesn't need to be rebuilt in three years.
The right cable standard depends on facility type, run lengths, bandwidth needs and budget. Here's a clear comparison to guide the conversation before you reach out.
| Specification | Cat6 | Cat6A | OM4 Multimode Fiber | OS2 Single-mode Fiber |
|---|---|---|---|---|
| Max speed | 10 Gbps (up to 55m) | 10 Gbps (full 100m) | 100 Gbps (up to 150m) | 100+ Gbps (km range) |
| Max distance at 10G | 55m | 100m | Up to 550m | Up to 40km+ |
| Best use case | General office drops, 1G environments | Office buildouts, AP drops, PoE++ | Building backbones, server rooms | Inter-building, campus, long runs |
| PoE support | ✓ Standard PoE | ✓ PoE++ (90W) | — | — |
| EMI resistance | Moderate | ✓ High (shielded option) | ✓ Immune | ✓ Immune |
| Relative cost | Lower | Moderate | Moderate–Higher | Higher |
| Installed by Cablify | ✓ | ✓ | ✓ | ✓ |
Every service is calibrated for the commercial environment it serves — not a residential installation approach adapted for business use.
Structured cabling, wireless support, conference room connectivity, rack integration and clean MDF/IDF organization for multi-floor corporate environments and growing business teams.
Network cabling for high-ceiling warehouses, fulfillment centers and logistics hubs — supporting wireless AP coverage, scanning devices, CCTV and operational uptime across active floors.
Low-voltage infrastructure for clinics, diagnostic labs and care environments with careful coordination in occupied, sensitive spaces and support for clinical communications systems.
Repeatable cabling standards for new store openings, remodels and multi-location retail programs — consistent infrastructure from one site to the next across regional and national footprints.
Front-of-house and back-of-house low-voltage cabling, security coverage, backbone planning and communications infrastructure for hospitality environments and shared commercial properties.
Fiber optic backbones, cabinet patching, high-density cable management and full documentation for data rooms and technical spaces where long-term supportability is non-negotiable.
Commercial buyers need more than a cable crew. The service model is designed to support the people who actually plan, approve and manage commercial infrastructure projects.
Structured cabling, network cabling, data drops, Cat6A upgrades, fiber backbones, rack integration and organized network rooms that are easier to scale, troubleshoot and support — with testing documentation that actually gets delivered at project close.
Start a project conversationActive facilities work, after-hours access planning, security coordination, pathway decisions, low-voltage infrastructure and multi-trade sequencing — inside commercial properties where disruption has a real cost to operations.
Discuss your facilityCablify supports commercial infrastructure projects across major metropolitan areas, regional business hubs and surrounding service markets — with dedicated location pages for each city.
Answers that help IT leaders, facilities managers and project teams understand how commercial cabling projects are scoped, installed and handed over.
Yes. Cablify focuses exclusively on commercial environments — offices, warehouses, healthcare facilities, retail sites, hospitality properties and other business-critical spaces. No residential work, ever.
Projects include Cat6, Cat6A structured cabling, fiber optic backbones, low-voltage systems, CCTV infrastructure, access control cabling, wireless AP drops and organized rack and cabinet integration inside commercial facilities.
Yes. Work can be planned around business hours, phased by zone or scheduled for after-hours and weekend access when commercial facilities need to stay operational throughout the project.
Always. Every project closes with cable testing, organized labeling and as-built documentation — so IT, facilities and operations teams inherit a fully supportable, clearly organized environment.
Yes. The service model is built for single-site upgrades and multi-location rollouts where consistent cabling standards, documentation templates and coordinated delivery across facilities matter.
Share the facility type, city, timeline and infrastructure needs — the next step moves toward a scope review and quote. Call 1-877-855-3865 or email sales@cablify.com to begin the conversation.
Send the city, facility type, timeline, number of drops, fiber needs, security scope or rollout requirements so the conversation can move toward a practical commercial quote.
Use the contact page to start a conversation about offices, warehouses, healthcare, retail, data center cabling or broader low-voltage infrastructure requirements.
Facility type, city, estimated cable drops, fiber backbone needs, security scope, number of locations, target timeline and whether the site is active during installation.
SERVICES: Structured cabling · Fiber optic · Network cabling · CCTV · Access control · Data center · Low voltage